[vc_row][vc_column][vc_single_image image=”2691″ img_size=”1200″ alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text el_class=”barakat”]

RADIATOR COOLANT SERVICE

Damaged cylinder walls, caused by overheating, may have been prevented by normal cooling system maintenance. A very expensive repair could have been prevented. Overheating an engine, even one time, can cause irreparable damage. Temperature over 137 degrees Celcius is almost always damaging.

Other damaging factors include the surface temperature. Kuwait is geographically positioned in the center of the region’s hottest areas with temperatures averaging above 50 degrees Celcius throughout the summer, according the Kuwait Meteorological Dept.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”2747″ img_size=”600″ alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]

A coolant flush and fill at regular intervals can help prevent overheating, freezing and premature cooling-system corrosion. A Bin Helfa Automotive Center coolant service starts with an examination of your radiator and engine cooling system. Then, old coolant is removed from your radiator and replaced with new coolant per your vehicle manufacturer’s recommendations.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]

Typical coolant fluid draining techniques removes only 45% to 50% of the fluid from the radiator and vehicle cooling system. With out state-of-the-art system, we implement a 15-minute exchange process that eliminates waiting for the engine warmup. Our engine-off-inch feature removes pulleys, belts, and fan blades from the safety equation. The vacuum mode creates a push/pull inch exchange process allowing the technician to safely remove high pressure in a hot system. Leak check feature allows the technician to test for leaks prior to refilling and the two clearly marked valves and an easy-to-read gauge make this machine very easy to use. No electricity is required and 90 pounds per square inch of shop air drives the exchange process, as well as the 2 GPM pump on the waste tank. Two external new coolant supply tanks allow on-board storage of two different coolant types.

[/vc_column_text][/vc_column][/vc_row]